PartsTable
Technical Data Sheet
Download PDF

GAC1001 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GAC1001: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 14.936 INCHES NOMINAL IN, aperture_width: 13.188 INCHES NOMINAL IN, overall_length: 17.438 INCHES NOMINAL IN, aperture_length: 15.688 INCHES NOMINAL IN, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-392-9182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GAC1001
NSN: 5330-00-392-9182
FSC: 5330 — Packing and Gasket Materials
CAGE: 71575 — CBS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width14.936 INCHES NOMINAL IN
aperture_width13.188 INCHES NOMINAL IN
overall_length17.438 INCHES NOMINAL IN
aperture_length15.688 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity14
inside_corner_radius1.969 INCHES NOMINAL IN
outside_corner_radius1.969 INCHES NOMINAL IN
cross-sectional_thickness0.344 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-392-9182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GAC1001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.344 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 1.969 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-1149 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 13.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.344 INCHES NOMINAL IN
INSIDE CORNER RADIUS1.969 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-1149 MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH17.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH14.936 INCHES NOMINAL IN
APERTURE WIDTH13.188 INCHES NOMINAL IN
APERTURE LENGTH15.688 INCHES NOMINAL IN
BOLT HOLE QUANTITY14
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy GAC1001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GAC1001?
GAC1001 is a GASKET.
What is the NSN for GAC1001?
GAC1001 is cataloged in the U.S. Government catalog under NSN 5330-00-392-9182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GAC1001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.