Can you outsmart the chameleon as it tries to blend in? Lift the round wooden leaf chips and see if any of the colors match your chameleon. With three levels of difficulty, every round is a new challenge.
•visual discrimination • memory • competitive challenge This part is cataloged in the U.S. Government catalog under NSN 5136-01-429-7354, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
GA541
NSN:5136-01-429-7354 FSC:5136 — Taps, Dies, and Collets; Hand and Machine CAGE:55719 — IDSC HOLDINGS LLC DIV SNAP-ON INDUSTRIAL, A DIV. OF IDSC HOLDINGS , LLC (USA)
SPECIFICATIONS
furnished_items
PLASTIC CASE
component_quantity
41
specification/standard_data
05047-ASME B94.9 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN
5136-01-429-7354
COMPONENT DIAGRAM
KEY FEATURES
•
COMPONENT QUANTITY: 41
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.9 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONSUPPLY ITEMS AND QUANTITIES: CONTAINS 1 EA HEXAGON DIES; 5/8 AND 1 IN. WIDTH ACROSS FLATS; MACHINE SCREW SIZES 4-40, 6-32, 8-32, 10-24 AND 12-24 UNC; 10-32 UNF; FRACTIONAL SIZES 1/4-20, 5/16-18, 3/8-16, 7/16-14 AND 1/2-13 UNC; 1/4-28, 5/16-24, 3/8-24, 7/16-20 AND 1/2-20 UNF; 1/8-27 NPT; TAPS IN SAME SIZES; DIESTOCK FOR 5/8 IN. HEX DIES; DIESTOCK FOR 1 IN. HEX 0 TO 1/4 IN. TAPS; ADJUSTABLE TAP WRENCH FOR 0 TO 1/4 IN. TAPS; ADJUSTABLE TAP WRENCH FOR 1/4 TO 1/2 IN. TAPS; CLAMP TYPE TAP WRENCH FOR 0 TO 1/2 IN. TAPS; SCREW PITCH GAGE; SCREWDRIVER IN
•
FURNISHED ITEMS: PLASTIC CASE
TECHNICAL CHARACTERISTICS
COMPONENT QUANTITY
41
SPECIFICATION/STANDARD DATA
05047-ASME B94.9 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONSUPPLY ITEMS AND QUANTITIES
CONTAINS 1 EA HEXAGON DIES; 5/8 AND 1 IN. WIDTH ACROSS FLATS; MACHINE SCREW SIZES 4-40, 6-32, 8-32, 10-24 AND 12-24 UNC; 10-32 UNF; FRACTIONAL SIZES 1/4-20, 5/16-18, 3/8-16, 7/16-14 AND 1/2-13 UNC; 1/4-28, 5/16-24, 3/8-24, 7/16-20 AND 1/2-20 UNF; 1/8-27 NPT; TAPS IN SAME SIZES; DIESTOCK FOR 5/8 IN. HEX DIES; DIESTOCK FOR 1 IN. HEX 0 TO 1/4 IN. TAPS; ADJUSTABLE TAP WRENCH FOR 0 TO 1/4 IN. TAPS; ADJUSTABLE TAP WRENCH FOR 1/4 TO 1/2 IN. TAPS; CLAMP TYPE TAP WRENCH FOR 0 TO 1/2 IN. TAPS; SCREW PITCH GAGE; SCREWDRIVER IN
FURNISHED ITEMS
PLASTIC CASE
OTHER ITEMS IN FSC 5136 — Taps, Dies, and Collets; Hand and Machine
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GA541?
GA541 is a DIE AND TAP SET,THREAD CUTTING manufactured by BS Toys.
What parts can replace GA541?
There is 1 known substitute for GA541: B94.9. Substitute compatibility should be verified for your specific system.
What is the NSN for GA541?
GA541 is cataloged in the U.S. Government catalog under NSN 5136-01-429-7354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.