PartsTable
Technical Data Sheet
Download PDF

GA508A — TAPE,MEASURING

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

GA508A: TAPE,MEASURING.

The TAPE,MEASURING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include width: 0.500 INCHES NOMINAL IN, end_type: BUTT, material: STEEL, plumb_bob: NOT INCLUDED, design_type: GENERAL PURPOSE DISTANCE MEASURING, inclosure_type: CASE. This part is cataloged in the U.S.

Government catalog under NSN 5210-00-081-4719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GA508A
NSN: 5210-00-081-4719
FSC: 5210 — Measuring Tools, Craftsmen's
CAGE: 55719 — IDSC HOLDINGS LLC DIV SNAP-ON INDUSTRIAL, A DIV. OF IDSC HOLDINGS , LLC (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
end_typeBUTT
materialSTEEL
plumb_bobNOT INCLUDED
design_typeGENERAL PURPOSE DISTANCE MEASURING
inclosure_typeCASE
winding_methodAUTOMATIC SPRING
special_featuresBELT CLIP; BLADE LOCK; FIRST 6 IN. GRADUATED IN 32NDS IN
reading_directionLEFT TO RIGHT
measuring_capacity8 FEET FT
standard_graduation_unitINCHES AND FEET
tape_smallest_graduation_unit1/16 IN. IN
NSN5210-00-081-4719
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available TAPE,MEASURING TITLE COMPONENT PN GA508A MFR TAPE,MEASURING
KEY FEATURES
•
READING DIRECTION: LEFT TO RIGHT
•
WINDING METHOD: AUTOMATIC SPRING
•
INCLOSURE TYPE: CASE
•
STANDARD GRADUATION UNIT: INCHES AND FEET
•
DESIGN TYPE: GENERAL PURPOSE DISTANCE MEASURING
•
NATIONAL BUREAU OF STANDARDS CERTIFICATION: NOT PROVIDED
•
WIDTH: 0.500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
READING DIRECTIONLEFT TO RIGHT
WINDING METHODAUTOMATIC SPRING
INCLOSURE TYPECASE
STANDARD GRADUATION UNITINCHES AND FEET
DESIGN TYPEGENERAL PURPOSE DISTANCE MEASURING
NATIONAL BUREAU OF STANDARDS CERTIFICATIONNOT PROVIDED
SPECIAL FEATURESBELT CLIP; BLADE LOCK; FIRST 6 IN. GRADUATED IN 32NDS IN
WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL
TAPE SMALLEST GRADUATION UNIT1/16 IN. IN
SUBSTITUTES & CROSS-REFERENCES 2
GGG-T-106 TY5CLAST1Reference document
Same NSN cross-reference
Reference document — Secondary reference
GGG-T-106Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy GA508A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GA508A?
GA508A is a TAPE,MEASURING.
What parts can replace GA508A?
There are 2 known substitutes for GA508A: GGG-T-106 TY5CLAST1, GGG-T-106. Substitute compatibility should be verified for your specific system.
What is the NSN for GA508A?
GA508A is cataloged in the U.S. Government catalog under NSN 5210-00-081-4719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GA508A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.