PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GA213
GA213 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 80.0 SHORE DUROMETER A MINIMUM OVERALL, special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, rim_surface_width: 0.062 INCHES NOMINAL IN, peripheral_diameter: 1.375 INCHES NOMINAL IN, center_hole_diameter: 1.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-236-1411, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GA213
NSN: 5330-00-236-1411
FSC: 5330
CAGE: 08302 — PACCAR WINCH INC DBA PACCAR WINCH DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating80.0 SHORE DUROMETER A MINIMUM OVERALL
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
rim_surface_width0.062 INCHES NOMINAL IN
peripheral_diameter1.375 INCHES NOMINAL IN
center_hole_diameter1.062 INCHES NOMINAL IN
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
cross-sectional_shape_styleCUP
material_document_and_classification30-H-30 FSCM 70438 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-236-1411
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GA213 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
RIM SURFACE WIDTH: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 30-H-30 FSCM 70438 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 80.0 SHORE DUROMETER A MINIMUM OVERALL
•
PERIPHERAL DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE DIAMETER: 1.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECUP
RIM SURFACE WIDTH0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION30-H-30 FSCM 70438 MFR REF SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING80.0 SHORE DUROMETER A MINIMUM OVERALL
PERIPHERAL DIAMETER1.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER1.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
187940PC63Interchangeable
interchangeable cross-reference
interchangeable
184382PC63Interchangeable
interchangeable cross-reference
interchangeable
184367PC63Interchangeable
interchangeable cross-reference
interchangeable
50303AInterchangeable
interchangeable cross-reference
interchangeable
760LXInterchangeable
interchangeable cross-reference
interchangeable
11984B101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GA213?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GA213?
GA213 is a GASKET.
What parts can replace GA213?
There are 22 known substitutes for GA213: 187940PC63, 184382PC63, 184367PC63 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GA213?
GA213 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-236-1411. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GA213

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026