PartsTable
Technical Data Sheet
Download PDF

GA10A2 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

GA10A2: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 0.936 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.443 INCHES NOMINAL IN, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-510-0992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GA10A2
NSN: 5310-00-510-0992
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter0.936 INCHES NOMINAL IN
thread_class2B
nut_thickness0.443 INCHES NOMINAL IN
thread_seriesUNF
special_featuresFOUR WRENCHING FLATS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.877 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
drilled_hole_diameter0.125 INCHES NOMINAL IN
NSN5310-00-510-0992
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GA10A2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.877 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION F
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT DIAMETER: 0.936 INCHES NOMINAL IN
•
NUT THICKNESS: 0.443 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.877 INCHES NOMINAL IN
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION F
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT DIAMETER0.936 INCHES NOMINAL IN
NUT THICKNESS0.443 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.125 INCHES NOMINAL IN
SPECIAL FEATURESFOUR WRENCHING FLATS
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GA10A2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GA10A2?
GA10A2 is a NUT,PLAIN,ROUND.
What is the NSN for GA10A2?
GA10A2 is cataloged in the U.S. Government catalog under NSN 5310-00-510-0992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GA10A2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.