PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G8X1
G8X1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 8.0 MILLIMETERS NOMINAL MM, overall_width: 7.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-555-5344, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G8X1
NSN: 3110-00-555-5344
FSC: 3110
CAGE: 72898 — GREEN BALL BEARING CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter8.0 MILLIMETERS NOMINAL MM
overall_width7.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
overall_outside_diameter24.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-555-5344
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: G8X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE DIAMETER: 8.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
MATERIALSTEEL OVERALL
STYLE DESIGNATORCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
OVERALL WIDTH7.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
BORE DIAMETER8.0 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
ND8N01Interchangeable
interchangeable cross-reference
interchangeable
9B8106Interchangeable
interchangeable cross-reference
interchangeable
WF791Interchangeable
interchangeable cross-reference
interchangeable
AA55473Interchangeable
interchangeable cross-reference
interchangeable
AA55473-29Interchangeable
interchangeable cross-reference
interchangeable
T8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy G8X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G8X1?
G8X1 is a BEARING,BALL,ANNULAR.
What parts can replace G8X1?
There are 15 known substitutes for G8X1: ND8N01, 9B8106, WF791 and 12 more. Substitute compatibility should be verified for your specific system.
Is G8X1 still available?
G8X1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G8X1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026