PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G8
G8 ✓ Verified by PartsTable
Hiditec · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

STRAP,TIE DOWN,ELECTRICAL COMPON. Key specifications include color: NATURAL, phase: THREE, shape: OBLONG, width: 1.750 INCHES NOMINAL IN, height: 4.000 INCHES NOMINAL IN, length: 4.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-056-3859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G8
NSN: 5330-00-056-3859
FSC: 5330
CAGE: 44218 — NORWALK COMPRESEER COMPANY INC DBA NORWALK COMPRESSOR COMPANY (USA)
SPECIFICATIONS
colorNATURAL
phaseTHREE
shapeOBLONG
width1.750 INCHES NOMINAL IN
height4.000 INCHES NOMINAL IN
length4.000 INCHES NOMINAL IN
diameter4.000 INCHES NOMINAL IN
materialSTEEL OVERALL
quantity1
ring_styleCONCENTRIC
table_typeSLOTTED LOCATION NOT OTHERWISE SPECIFIED
becket_typeSHACKLE
NSN5330-00-056-3859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G8 MFR: Hiditec ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1ACL13Interchangeable
interchangeable cross-reference
interchangeable
102931Interchangeable
interchangeable cross-reference
interchangeable
6191-24VDCInterchangeable
interchangeable cross-reference
interchangeable
S8-WInterchangeable
interchangeable cross-reference
interchangeable
B8VWInterchangeable
interchangeable cross-reference
interchangeable
GEMC0G-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G8?
G8 is a STRAP,TIE DOWN,ELECTRICAL COMPON manufactured by Hiditec.
What parts can replace G8?
There are 21 known substitutes for G8: 1ACL13, 102931, 6191-24VDC and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G8?
G8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-056-3859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026