PartsTable
Technical Data Sheet
Download PDF

G7854-33 — BEARING,SHELL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

G7854-33: BEARING,SHELL.

The BEARING,SHELL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.190 INCHES NOMINAL IN, outside_diameter: 0.520 INCHES NOMINAL IN, operating_pressure: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 12000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-391-5867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G7854-33
NSN: 3110-00-391-5867
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 16712 — SIEMENS ENERGY, INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.190 INCHES NOMINAL IN
outside_diameter0.520 INCHES NOMINAL IN
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identification4920-01-339-9212
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
cross-sectional_shape_styleROUND
measuring_method_and_length12.000 INCHES NOMINAL OVERALL IN
minimum_inside_bending_radius3.000 INCHES IN
NSN3110-00-391-5867
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: G7854-33 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 6
G9678PC33Reference document
Same NSN cross-reference
Reference document — Secondary reference
1503412Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D2-9340-36Reference document
Same NSN cross-reference
Reference document — Secondary reference
G7852PC33Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
W122N2X1Reference document
Same NSN cross-reference
Reference document — Secondary reference
G7854PC33Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G7854-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G7854-33?
G7854-33 is a BEARING,SHELL.
What parts can replace G7854-33?
There are 6 known substitutes for G7854-33: G9678PC33, 1503412, D2-9340-36 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G7854-33?
G7854-33 is cataloged in the U.S. Government catalog under NSN 3110-00-391-5867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G7854-33