PartsTable
Technical Data Sheet
Download PDF

G775734-1 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G775734-1: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 22.190 INCHES MINIMUM AND 22.310 INCHES MAXIMUM IN, length: 38.000 INCHES NOMINAL IN, material: PLASTIC FOAM CUSHIONING, thickness: 0.500 INCHES NOMINAL IN, special_features: END ITEM: SMART-T, part_name_assigned_by_controlling_agency: PAD,FOAM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-578-0201, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G775734-1
NSN: 5340-01-578-0201
FSC: 5340 — Hardware, Commercial
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
width22.190 INCHES MINIMUM AND 22.310 INCHES MAXIMUM IN
length38.000 INCHES NOMINAL IN
materialPLASTIC FOAM CUSHIONING
thickness0.500 INCHES NOMINAL IN
special_featuresEND ITEM: SMART-T
part_name_assigned_by_controlling_agencyPAD,FOAM
NSN5340-01-578-0201
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G775734-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 38.000 INCHES NOMINAL IN
•
WIDTH: 22.190 INCHES MINIMUM AND 22.310 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC FOAM CUSHIONING
•
THICKNESS: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH38.000 INCHES NOMINAL IN
SPECIAL FEATURESEND ITEM: SMART-T
WIDTH22.190 INCHES MINIMUM AND 22.310 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPAD,FOAM
MATERIALPLASTIC FOAM CUSHIONING
THICKNESS0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
G775734Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G775734-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G775734-1?
G775734-1 is a PAD,CUSHIONING.
What parts can replace G775734-1?
There is 1 known substitute for G775734-1: G775734. Substitute compatibility should be verified for your specific system.
What is the NSN for G775734-1?
G775734-1 is cataloged in the U.S. Government catalog under NSN 5340-01-578-0201. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G775734-1