PartsTable
Technical Data Sheet
Download PDF

G76-1 — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

G76-1: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 0.1280 INCHES MINIMUM AND 0.1320 INCHES MAXIMUM IN, material: STEEL OVERALL, corner_shape: SQUARE ALL CORNERS, outside_diameter: 0.2480 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN, style_designator: ROUND, overall_thickness: 0.0620 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-162-2580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G76-1
NSN: 3120-01-162-2580
NIINs: 011622580, 013101835
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 00328 — DESIGNATRONICS INCORPORATED DIV STERLING INSTRUMENTS DIV (USA)
SPECIFICATIONS
diameter0.1280 INCHES MINIMUM AND 0.1320 INCHES MAXIMUM IN
materialSTEEL OVERALL
corner_shapeSQUARE ALL CORNERS
outside_diameter0.2480 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
style_designatorROUND
overall_thickness0.0620 INCHES NOMINAL IN
surface_conditionLAPPED
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN3120-01-162-2580
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: G76-1 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
OVERALL THICKNESS: 0.0620 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND
•
DIAMETER: 0.1280 INCHES MINIMUM AND 0.1320 INCHES MAXIMUM IN
•
SURFACE CONDITION: LAPPED
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 0.2480 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
OVERALL THICKNESS0.0620 INCHES NOMINAL IN
STYLE DESIGNATORROUND
DIAMETER0.1280 INCHES MINIMUM AND 0.1320 INCHES MAXIMUM IN
SURFACE CONDITIONLAPPED
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER0.2480 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 1
613893-108Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy G76-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G76-1?
G76-1 is a BEARING,WASHER,THRUST.
What parts can replace G76-1?
There is 1 known substitute for G76-1: 613893-108. Substitute compatibility should be verified for your specific system.
What is the NSN for G76-1?
G76-1 is cataloged in the U.S. Government catalog under NSN 3120-01-162-2580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G76-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.