PartsTable
Technical Data Sheet
PartsTable / MRO / G7212-137
G7212-137 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The G7212-137 is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, hole_diameter: 0.173 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN, overall_width: 2.000 INCHES NOMINAL IN, aperture_width: 1.020 INCHES NOMINAL IN, overall_length: 4.380 INCHES NOMINAL IN, aperture_length: 3.400 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-454-6266, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ G7212-137
NSN: 5999-00-454-6266
FSC: 5999
CAGE: 84347 — SINGER CO THE KEARFOTT DIV (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
hole_diameter0.173 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
overall_width2.000 INCHES NOMINAL IN
aperture_width1.020 INCHES NOMINAL IN
overall_length4.380 INCHES NOMINAL IN
aperture_length3.400 INCHES NOMINAL IN
bolt_hole_quantity4
cross-sectional_height0.020 INCHES NOMINAL IN
cross-sectional_shape_styleWIRE AND COMPOSITION
environmental_protection_material_locationTHROUGHOUT SEALING GASKET
outside_edge_to_bolt_hole_center_distance_along_length0.250 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
NSN5999-00-454-6266
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN G7212-137 MFR G7212-137
KEY FEATURES
•
APERTURE LENGTH: 3.400 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
HOLE DIAMETER: 0.173 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
APERTURE WIDTH: 1.020 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT SEALING GASKET
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH3.400 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
HOLE DIAMETER0.173 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
APERTURE WIDTH1.020 INCHES NOMINAL IN
OVERALL LENGTH4.380 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT SEALING GASKET
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.360 INCHES MINIMUM AND 3.400 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
8020Upgraded Successor
successor cross-reference
successor
239-044-0001Upgraded Successor
successor cross-reference
successor
G7123-138Interchangeable
interchangeable cross-reference
interchangeable
G7212&137Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy G7212-137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G7212-137?
G7212-137 is a G7212-137. It is classified as a MRO (MRO_GENERAL).
What parts can replace G7212-137?
There are 4 known substitutes for G7212-137: 8020, 239-044-0001, G7123-138 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G7212-137?
G7212-137 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-454-6266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G7212-137

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026