The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: SPECIAL, width: 5.900 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN, length: 4.125 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, thickness: 0.080 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN, mounting_hole_type: UNTHREADED. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-515-1267, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
G636314-1
NSN:5340-01-515-1267 FSC:5340 — Hardware, Commercial CAGE:49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
shape
SPECIAL
width
5.900 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN
length
4.125 INCHES NOMINAL IN
material
ALUMINUM ALLOY 6061
thickness
0.080 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
special_features
PLENUM PANEL PLATE HAS TWO CHAMFERED EDGES @ TOP (2X45 DEGREES X .25); PLATE SHAPE IS LARGE RECTANGLE ON TOP OF A SMALLER RECTANGLE; ALL MOUNTING HOLES ARE COUNTERSUNK
mounting_hole_type
UNTHREADED
end_item_identification
COVER, RADOME
material_document_and_classification
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency
PANEL PLENUM
surface_treatment_document_and_classification
MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A
NSN
5340-01-515-1267
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 4.125 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
•
SHAPE: SPECIAL
•
WIDTH: 5.900 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH
4.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
SHAPE
SPECIAL
SPECIAL FEATURES
PLENUM PANEL PLATE HAS TWO CHAMFERED EDGES @ TOP (2X45 DEGREES X .25); PLATE SHAPE IS LARGE RECTANGLE ON TOP OF A SMALLER RECTANGLE; ALL MOUNTING HOLES ARE COUNTERSUNK
WIDTH
5.900 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCY
PANEL PLENUM
END ITEM IDENTIFICATION
COVER, RADOME
MATERIAL
ALUMINUM ALLOY 6061
THICKNESS
0.080 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G636314-1?
G636314-1 is a PLATE,MOUNTING.
What parts can replace G636314-1?
There is 1 known substitute for G636314-1: G636314. Substitute compatibility should be verified for your specific system.
What is the NSN for G636314-1?
G636314-1 is cataloged in the U.S. Government catalog under NSN 5340-01-515-1267. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.