PartsTable
Technical Data Sheet
Download PDF

G6183ANDCLASS2ANDGRADES0FT — CORK AND RUBBER SHEET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G6183ANDCLASS2ANDGRADES0FT: CORK AND RUBBER SHEET.

The CORK AND RUBBER SHEET is a the manufacturer industrial component. Key specifications include width: 18.000 INCHES NOMINAL IN, length: 36.000 INCHES NOMINAL IN, material: RUBBER SYNTHETIC BINDER, thickness: 0.031 INCHES NOMINAL IN, special_features: 45 TO 60 DUROMETER RATING, nondefinitive_spec/std_data: 2 CLASS AND SOFT GRADE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-292-6436, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G6183ANDCLASS2ANDGRADES0FT
NSN: 5330-00-292-6436
FSC: 5330 — Packing and Gasket Materials
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width18.000 INCHES NOMINAL IN
length36.000 INCHES NOMINAL IN
materialRUBBER SYNTHETIC BINDER
thickness0.031 INCHES NOMINAL IN
special_features45 TO 60 DUROMETER RATING
nondefinitive_spec/std_data2 CLASS AND SOFT GRADE
NSN5330-00-292-6436
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G6183ANDCLASS2ANDGRADES0FT MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 36.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 2 CLASS AND SOFT GRADE
•
WIDTH: 18.000 INCHES NOMINAL IN
•
MATERIAL: CORK LOCATION NOT OTHERWISE SPECIFIED
•
THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH36.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA2 CLASS AND SOFT GRADE
SPECIAL FEATURES45 TO 60 DUROMETER RATING
WIDTH18.000 INCHES NOMINAL IN
MATERIALCORK LOCATION NOT OTHERWISE SPECIFIED
MATERIALRUBBER SYNTHETIC BINDER
THICKNESS0.031 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
MILG6183CLASS2GRADES0FTReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G6183ANDCLASS2ANDGRADES0FT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G6183ANDCLASS2ANDGRADES0FT?
G6183ANDCLASS2ANDGRADES0FT is a CORK AND RUBBER SHEET.
What parts can replace G6183ANDCLASS2ANDGRADES0FT?
There is 1 known substitute for G6183ANDCLASS2ANDGRADES0FT: MILG6183CLASS2GRADES0FT. Substitute compatibility should be verified for your specific system.
What is the NSN for G6183ANDCLASS2ANDGRADES0FT?
G6183ANDCLASS2ANDGRADES0FT is cataloged in the U.S. Government catalog under NSN 5330-00-292-6436. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G6183ANDCLASS2ANDGRADES0FT