PartsTable
Technical Data Sheet
Download PDF

G5-324 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

G5-324: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY SAE 797 OVERALL, overall_length: 1.2500 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES OVERALL, special_features: WIREGULARLY SHAPED FLANGE ON LEFT END, body_inside_diameter: 0.8125 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM IN, body_outside_diameter: 1.0615 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-394-6299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G5-324
NSN: 3120-00-394-6299
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 58923 — ROPER INDUSTRIES INC ROPER PUMP CO DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY SAE 797 OVERALL
overall_length1.2500 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES OVERALL
special_featuresWIREGULARLY SHAPED FLANGE ON LEFT END
body_inside_diameter0.8125 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM IN
body_outside_diameter1.0615 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN
lubricant_accommodation_styleGROOVED OPEN BOTH ENDS
NSN3120-00-394-6299
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: G5-324 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES OVERALL
•
BODY OUTSIDE DIAMETER: 1.0615 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN
•
BODY INSIDE DIAMETER: 0.8125 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM IN
•
LUBRICANT ACCOMMODATION STYLE: GROOVED OPEN BOTH ENDS
•
MATERIAL: COPPER ALLOY SAE 797 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES OVERALL
BODY OUTSIDE DIAMETER1.0615 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN
OVERALL LENGTH1.2500 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.8125 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM IN
LUBRICANT ACCOMMODATION STYLEGROOVED OPEN BOTH ENDS
SPECIAL FEATURESWIREGULARLY SHAPED FLANGE ON LEFT END
MATERIALCOPPER ALLOY SAE 797 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
01416Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy G5-324?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G5-324?
G5-324 is a BEARING,SLEEVE.
What parts can replace G5-324?
There is 1 known substitute for G5-324: 01416. Substitute compatibility should be verified for your specific system.
What is the NSN for G5-324?
G5-324 is cataloged in the U.S. Government catalog under NSN 3120-00-394-6299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G5-324