G5-000 — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

G5-000: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include bore_diameter: 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, surface_finish: GROUND, internal_clearance: 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN, overall_outside_diameter: 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, retainer_fabrication_method: MACHINED. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-166-2642, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

G5-000

NSN: 3110-01-166-2642
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)

SPECIFICATIONS

bore_diameter	0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
surface_finish	GROUND
shield_quantity	2
internal_clearance	0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
overall_outside_diameter	0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
retainer_fabrication_method	MACHINED
NSN	3110-01-166-2642

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MACHINED

•

INTERNAL CLEARANCE: 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN

•

SURFACE FINISH: GROUND

•

SHIELD QUANTITY: 2

•

OVERALL OUTSIDE DIAMETER: 0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN

•

BORE DIAMETER: 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MACHINED
INTERNAL CLEARANCE	0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
SURFACE FINISH	GROUND
SHIELD QUANTITY	2
OVERALL OUTSIDE DIAMETER	0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
SPECIAL FEATURES	10 TO 50 MG SPECIFIED LUBRICANT EACH BEARING; BACK TO BACK MTG; 10 TO 30 LB PRELOAD; INNER SPACER 0.3760 IN. MIN,0.3780 IN. MAX ID,0.4600 IN. NOM OD; OUTER SPACER 0.5400 IN. NOM ID,0.6220 IN. MIN,0.6240 IN. MAX OD LBS
BORE DIAMETER	0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 4

SR40208PTK811-1ABEC7TReference document

Same NSN cross-reference

Reference document — Secondary reference

12294082Reference document

Same NSN cross-reference

Reference document — Secondary reference

SSRI-1035ZSD513DB20KCA7P58LGReference document

Same NSN cross-reference

Reference document — Secondary reference

G005Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy G5-000?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is G5-000?

G5-000 is a BEARING,BALL,DUPLEX.

What parts can replace G5-000?

There are 4 known substitutes for G5-000: SR40208PTK811-1ABEC7T, 12294082, SSRI-1035ZSD513DB20KCA7P58LG and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for G5-000?

G5-000 is cataloged in the U.S. Government catalog under NSN 3110-01-166-2642. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

G5-000 — BEARING,BALL,DUPLEX

Request a Quote — G5-000