PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G4-7-15
G4-7-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, special_features: THREADED RETAINER WITH 0.625 INCH HEX HEAD IN, center_hole_diameter: 0.316 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, cross-sectional_height: 0.812 INCHES NOMINAL IN, material_document_and_classification: QQ-S-633-FS-B1112 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-168-9169, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G4-7-15
NSN: 5330-01-168-9169
FSC: 5330
CAGE: 31923 — TODD COMBUSTION INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
special_featuresTHREADED RETAINER WITH 0.625 INCH HEX HEAD IN
center_hole_diameter0.316 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
cross-sectional_height0.812 INCHES NOMINAL IN
material_document_and_classificationQQ-S-633-FS-B1112 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-168-9169
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G4-7-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1212 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-FS-B1112 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.812 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.316 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESTHREADED RETAINER WITH 0.625 INCH HEX HEAD IN
MATERIALSTEEL COMP 1212 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-FS-B1112 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL HEIGHT0.812 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.316 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
AA51154A-1B9BInterchangeable
interchangeable cross-reference
interchangeable
G24Interchangeable
interchangeable cross-reference
interchangeable
11516-RInterchangeable
interchangeable cross-reference
interchangeable
49716Interchangeable
interchangeable cross-reference
interchangeable
C08746Interchangeable
interchangeable cross-reference
interchangeable
408Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy G4-7-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G4-7-15?
G4-7-15 is a RETAINER,PACKING.
What parts can replace G4-7-15?
There are 24 known substitutes for G4-7-15: AA51154A-1B9B, G24, 11516-R and 21 more. Substitute compatibility should be verified for your specific system.
Is G4-7-15 still available?
G4-7-15 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G4-7-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026