PartsTable
Technical Data Sheet
Download PDF

G3H234-252 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

G3H234-252: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: SLEEVE, nut_length: 0.875 INCHES NOMINAL IN, nut_diameter: 1.623 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-773-9631, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G3H234-252
NSN: 5310-00-773-9631
FSC: 5310 — Nuts and Washers
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleSLEEVE
nut_length0.875 INCHES NOMINAL IN
nut_diameter1.623 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
flange_thickness0.710 INCHES NOMINAL IN
thread_directionLEFT-HAND
nominal_thread_size1.375 INCHES IN
cross-sectional_shapeHEXAGONAL NUT
hole_type_and_quantity1 TAPPED
hole_configuration_styleCONFIGURATION A
NSN5310-00-773-9631
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G3H234-252 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 1.937 INCHES NOMINAL IN
•
HOLE THREAD QUANTITY PER INCH: 20
•
NUT LENGTH: 0.875 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.710 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION A
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 1.375 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS1.937 INCHES NOMINAL IN
HOLE THREAD QUANTITY PER INCH20
NUT LENGTH0.875 INCHES NOMINAL IN
FLANGE THICKNESS0.710 INCHES NOMINAL IN
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION A
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE1.375 INCHES IN
NUT DIAMETER1.623 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGONAL NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
G3H234Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G3H234-252?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G3H234-252?
G3H234-252 is a NUT,SLEEVE.
What parts can replace G3H234-252?
There is 1 known substitute for G3H234-252: G3H234. Substitute compatibility should be verified for your specific system.
What is the NSN for G3H234-252?
G3H234-252 is cataloged in the U.S. Government catalog under NSN 5310-00-773-9631. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G3H234-252