PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G37262
G37262 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL, nut_style: SLEEVE, nut_length: 0.966 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN, nut_diameter: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN, thread_class: 2B, overall_width: 0.5156 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4415, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G37262
NSN: 3110-00-142-4415
FSC: 3110
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
nut_styleSLEEVE
nut_length0.966 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
nut_diameter0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
thread_class2B
overall_width0.5156 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_diameter0.344 INCHES NOMINAL IN
flange_thickness0.063 INCHES NOMINAL IN
outside_diameter2.5310 INCHES NOMINAL IN
special_featuresTWO SLOTS LOCATED AT 180 DEG ON FLANGE OUTSIDE DIA,0.046 IN. RADIUS IN
style_designatorNORMAL ANGLE
NSN3110-00-142-4415
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: G37262 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 2.5310 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.5156 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER2.5310 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
WC73614Interchangeable
interchangeable cross-reference
interchangeable
37262Interchangeable
interchangeable cross-reference
interchangeable
F73614Interchangeable
interchangeable cross-reference
interchangeable
4730002790985Interchangeable
interchangeable cross-reference
interchangeable
RD-7994-RD-50-1-DInterchangeable
interchangeable cross-reference
interchangeable
4478695B-PIECE6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy G37262?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G37262?
G37262 is a CUP,TAPERED ROLLER BEARING.
What parts can replace G37262?
There are 21 known substitutes for G37262: WC73614, 37262, F73614 and 18 more. Substitute compatibility should be verified for your specific system.
Is G37262 still available?
G37262 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G37262

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026