PartsTable
Technical Data Sheet
Download PDF

G372-35 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

G372-35: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, nut_style: ROUND, nut_diameter: 0.390 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.610 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-373-4952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G372-35
NSN: 5310-00-373-4952
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
nut_styleROUND
nut_diameter0.390 INCHES NOMINAL IN
thread_class2B
nut_thickness0.610 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
drive_point_depth0.070 INCHES NOMINAL IN
drive_point_width0.094 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
small_end_diameter0.219 INCHES NOMINAL IN
undercut_thickness0.547 INCHES NOMINAL IN
NSN5310-00-373-4952
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G372-35 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
DRIVE POINT WIDTH: 0.094 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.390 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.070 INCHES NOMINAL IN
•
UNDERCUT THICKNESS: 0.547 INCHES NOMINAL IN
•
NUT THICKNESS: 0.610 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
DRIVE POINT WIDTH0.094 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.390 INCHES NOMINAL IN
DRIVE POINT DEPTH0.070 INCHES NOMINAL IN
UNDERCUT THICKNESS0.547 INCHES NOMINAL IN
NUT THICKNESS0.610 INCHES NOMINAL IN
SMALL END DIAMETER0.219 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
00265-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
ML620-35Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G372-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G372-35?
G372-35 is a NUT,PLAIN,ROUND.
What parts can replace G372-35?
There are 2 known substitutes for G372-35: 00265-11, ML620-35. Substitute compatibility should be verified for your specific system.
What is the NSN for G372-35?
G372-35 is cataloged in the U.S. Government catalog under NSN 5310-00-373-4952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G372-35