PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G372-24
G372-24 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL, nut_style: SLEEVE, nut_length: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN, nut_diameter: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN, thread_class: 2B, thread_length: 0.218 INCHES NOMINAL OVERALL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-860-9522, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G372-24
NSN: 5310-00-860-9522
FSC: 5310
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
nut_styleSLEEVE
nut_length0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
nut_diameter0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
thread_class2B
thread_length0.218 INCHES NOMINAL OVERALL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_diameter0.344 INCHES NOMINAL IN
flange_thickness0.062 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
nominal_thread_size0.164 INCHES IN
NSN5310-00-860-9522
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G372-24 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT LENGTH: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
FLANGE THICKNESS: 0.062 INCHES NOMINAL IN
•
COUNTERBORE DIAMETER: 0.166 INCHES MINIMUM AND 0.170 INCHES MAXIMUM NUT IN
•
NUT DIAMETER: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
NOMINAL THREAD SIZE0.164 INCHES IN
NUT LENGTH0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
FLANGE THICKNESS0.062 INCHES NOMINAL IN
COUNTERBORE DIAMETER0.166 INCHES MINIMUM AND 0.170 INCHES MAXIMUM NUT IN
NUT DIAMETER0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTANODIZE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A547-214Interchangeable
interchangeable cross-reference
interchangeable
547A002656Interchangeable
interchangeable cross-reference
interchangeable
00265-6Interchangeable
Same NIIN cross-reference
interchangeable
ML620-24Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G372-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G372-24?
G372-24 is a NUT,SLEEVE.
What parts can replace G372-24?
There are 4 known substitutes for G372-24: A547-214, 547A002656, 00265-6 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G372-24?
G372-24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-860-9522. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G372-24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026