PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G359575
G359575 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_length: 0.513 INCHES NOMINAL IN, overall_length: 0.538 INCHES NOMINAL IN, nominal_thread_size: 0.190 INCHES IN, thread_quantity_per_inch: 32, thread_series_designator: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-830-2141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G359575
NSN: 5340-00-830-2141
FSC: 5340
CAGE: 01714 — LUCENT TECHNOLOGIES INC ADVANCED TECHNOLOGY SYSTEMS (USA)
SPECIFICATIONS
shapeROUND
thread_length0.513 INCHES NOMINAL IN
overall_length0.538 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
material_document_and_classificationQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-830-2141
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G359575 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHAPE: ROUND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
THREAD LENGTH: 0.513 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHAPEROUND
NOMINAL THREAD SIZE0.190 INCHES IN
OVERALL LENGTH0.538 INCHES NOMINAL IN
THREAD LENGTH0.513 INCHES NOMINAL IN
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
271-LInterchangeable
interchangeable cross-reference
interchangeable
5321-0271-LInterchangeable
interchangeable cross-reference
interchangeable
30209Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G359575?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G359575?
G359575 is a PLUNGER,QUICK RELEASE.
What parts can replace G359575?
There are 3 known substitutes for G359575: 271-L, 5321-0271-L, 30209. Substitute compatibility should be verified for your specific system.
What is the NSN for G359575?
G359575 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-830-2141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G359575

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026