G307: BEARING,BALL,DUPLEX.
The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC, current_type: AC, bore_diameter: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, contact_angle: 13.0 DEGREES NOMINAL, overall_width: 12.000 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the U.S.
Government catalog under NSN 3110-01-181-0844, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | PLASTIC |
| current_type | AC |
| bore_diameter | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN |
| contact_angle | 13.0 DEGREES NOMINAL |
| overall_width | 12.000 INCHES NOMINAL IN |
| load_direction | ANGULAR |
| overall_length | 15.000 INCHES NOMINAL IN |
| surface_finish | GROUND |
| voltage_rating | 110.0 VOLTS MINIMUM AND 220.0 VOLTS MAXIMUM |
| shield_quantity | 2 |
| frequency_rating | 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM |
| special_features | PASSIVATE,QQ-P-35 OVERALL;INNER AND OUTER RING SPACERS; DIP AND CENTRIFUGE AT 200 G F 0.9 MIN TO 1.1 MAX MINUTES WITH SPECIFIED LUBRICANT G |
| NSN | 3110-01-181-0844 |
| RETAINER FABRICATION METHOD | COILED |
| BEARING PRELOAD RATING | 2.0 POUNDS MINIMUM AND 3.0 POUNDS MAXIMUM LBS |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| SURFACE FINISH | GROUND |
| SHIELD QUANTITY | 2 |
| MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| OVERALL WIDTH | 1.5750 INCHES MINIMUM AND 1.5850 INCHES MAXIMUM IN |
| OVERALL OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| SPECIFICATION/STANDARD DATA | 58260-13084578 GOVERNMENT SPECIFICATION |
| CONTACT ANGLE | 13.0 DEGREES NOMINAL |