PartsTable
Technical Data Sheet

G28/NA NON-ASBESTOS — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G28/NA NON-ASBESTOS: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING AND FIBER NONASBESTOS OVERALL, special_features: (METAFLEX TYPE C)STAINLESS STEEL WITH NON-ABESTOS FILLER(METAFLEX TYPE C)STAINLESS STEEL WITH NON-ABESTOS FILLER, end_item_identification: STEAM TRAP;NIMITZ CLASS CVNSTEAM TRAP;NIMITZ CLASS CVN, part_name_assigned_by_controlling_agency: BOTTOM PLUG GASKETBOTTOM PLUG GASKET. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-472-8836, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G28/NA NON-ASBESTOS
NSN: 5330-01-472-8836
FSC: 5330 — Packing and Gasket Materials
CAGE: 67248 — PLENTY INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING AND FIBER NONASBESTOS OVERALL
special_features(METAFLEX TYPE C)STAINLESS STEEL WITH NON-ABESTOS FILLER(METAFLEX TYPE C)STAINLESS STEEL WITH NON-ABESTOS FILLER
end_item_identificationSTEAM TRAP;NIMITZ CLASS CVNSTEAM TRAP;NIMITZ CLASS CVN
part_name_assigned_by_controlling_agencyBOTTOM PLUG GASKETBOTTOM PLUG GASKET
NSN5330-01-472-8836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G28/NA NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING AND FIBER NONASBESTOS OVERALL
TECHNICAL CHARACTERISTICS
SPECIAL FEATURES(METAFLEX TYPE C)STAINLESS STEEL WITH NON-ABESTOS FILLER(METAFLEX TYPE C)STAINLESS STEEL WITH NON-ABESTOS FILLER
PART NAME ASSIGNED BY CONTROLLING AGENCYBOTTOM PLUG GASKETBOTTOM PLUG GASKET
END ITEM IDENTIFICATIONSTEAM TRAP;NIMITZ CLASS CVNSTEAM TRAP;NIMITZ CLASS CVN
MATERIALSTEEL CORROSION RESISTING AND FIBER NONASBESTOS OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
20867-2Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
1681491Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20867-2 ITEM 36 NON-ASBESTOSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy G28/NA NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G28/NA NON-ASBESTOS?
G28/NA NON-ASBESTOS is a GASKET,SPIRAL WOUND.
What parts can replace G28/NA NON-ASBESTOS?
There are 3 known substitutes for G28/NA NON-ASBESTOS: 20867-2, 1681491, 20867-2 ITEM 36 NON-ASBESTOS. Substitute compatibility should be verified for your specific system.
What is the NSN for G28/NA NON-ASBESTOS?
G28/NA NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-472-8836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G28/NA NON-ASBESTOS