PartsTable
Technical Data Sheet
Download PDF

G243704-1 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G243704-1: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, shank_length: 0.656 INCHES NOMINAL IN, hole_diameter: 0.188 INCHES NOMINAL IN, overall_height: 1.344 INCHES NOMINAL IN, shank_diameter: 0.781 INCHES NOMINAL IN, style_designator: COUNTERBORED FLANGE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-575-1873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G243704-1
NSN: 5340-00-575-1873
FSC: 5340 — Hardware, Commercial
CAGE: 70408 — AT AND T CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
shank_length0.656 INCHES NOMINAL IN
hole_diameter0.188 INCHES NOMINAL IN
overall_height1.344 INCHES NOMINAL IN
shank_diameter0.781 INCHES NOMINAL IN
style_designatorCOUNTERBORED FLANGE
first_counterbore_depth0.281 INCHES NOMINAL IN
material_hardness_rating60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM
first_counterbore_diameter0.313 INCHES NOMINAL IN
outside/top_flange_diameter1.063 INCHES NOMINAL IN
NSN5340-00-575-1873
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G243704-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.781 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 1.063 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM
•
FIRST COUNTERBORE DIAMETER: 0.313 INCHES NOMINAL IN
•
SHANK LENGTH: 0.656 INCHES NOMINAL IN
•
STYLE DESIGNATOR: COUNTERBORED FLANGE
•
FIRST COUNTERBORE DEPTH: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.781 INCHES NOMINAL IN
OVERALL HEIGHT1.344 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER1.063 INCHES NOMINAL IN
MATERIAL HARDNESS RATING60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM
FIRST COUNTERBORE DIAMETER0.313 INCHES NOMINAL IN
SHANK LENGTH0.656 INCHES NOMINAL IN
STYLE DESIGNATORCOUNTERBORED FLANGE
FIRST COUNTERBORE DEPTH0.281 INCHES NOMINAL IN
COLORBLACK
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy G243704-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G243704-1?
G243704-1 is a BUMPER.
What is the NSN for G243704-1?
G243704-1 is cataloged in the U.S. Government catalog under NSN 5340-00-575-1873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G243704-1