PartsTable
Technical Data Sheet
Download PDF

G231134-1 — NUT,PLAIN,SQUARE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

G231134-1: NUT,PLAIN,SQUARE.

The NUT,PLAIN,SQUARE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SQUARE, nut_height: 0.062 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-535-8791, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G231134-1
NSN: 5310-00-535-8791
FSC: 5310 — Nuts and Washers
CAGE: 64959 — AMERICAN TELEPHONE AND TELEGRAPH CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSQUARE
nut_height0.062 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats0.188 INCHES NOMINAL IN
nominal_thread_size0.086 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch56
surface_treatment_document_and_classificationQQ-Z-325,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-535-8791
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G231134-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
•
NUT HEIGHT: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: SQUARE
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.086 INCHES IN
NUT HEIGHT0.062 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
NUT STYLESQUARE
THREAD CLASS2B
THREAD QUANTITY PER INCH56
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
G231134Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy G231134-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G231134-1?
G231134-1 is a NUT,PLAIN,SQUARE.
What parts can replace G231134-1?
There is 1 known substitute for G231134-1: G231134. Substitute compatibility should be verified for your specific system.
What is the NSN for G231134-1?
G231134-1 is cataloged in the U.S. Government catalog under NSN 5310-00-535-8791. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G231134-1