PartsTable
Technical Data Sheet
Download PDF

G23-5-10 — WASHER,BEVEL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

G23-5-10: WASHER,BEVEL.

The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, hole_diameter: 0.315 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, minor_thickness: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN, outside_diameter: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, style_designator: BEVEL, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-070-7132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G23-5-10
NSN: 5310-01-070-7132
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
hole_diameter0.315 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
minor_thickness0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
outside_diameter0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
style_designatorBEVEL
surface_treatmentANODIZE OVERALL
specification/standard_data26512-G23 MANUFACTURERS STANDARD
material_document_and_classificationQQ-A-200/3 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-070-7132
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G23-5-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MINOR THICKNESS: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BEVEL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/3 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 26512-G23 MANUFACTURERS STANDARD
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MINOR THICKNESS0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
STYLE DESIGNATORBEVEL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA26512-G23 MANUFACTURERS STANDARD
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
HOLE DIAMETER0.315 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
G23-5-5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G23-5-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G23-5-10?
G23-5-10 is a WASHER,BEVEL.
What parts can replace G23-5-10?
There is 1 known substitute for G23-5-10: G23-5-5. Substitute compatibility should be verified for your specific system.
What is the NSN for G23-5-10?
G23-5-10 is cataloged in the U.S. Government catalog under NSN 5310-01-070-7132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G23-5-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.