PartsTable
Technical Data Sheet
Download PDF

G23-3-16 — WASHER,BEVEL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

G23-3-16: WASHER,BEVEL.

The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, hole_diameter: 0.192 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, minor_thickness: 0.062 INCHES NOMINAL IN, outside_diameter: 0.438 INCHES NOMINAL IN, special_features: WASHER HAS A BEVEL ANGLE OF 16 DEGREES, style_designator: BEVEL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-628-7608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G23-3-16
NSN: 5310-01-628-7608
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
hole_diameter0.192 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
minor_thickness0.062 INCHES NOMINAL IN
outside_diameter0.438 INCHES NOMINAL IN
special_featuresWASHER HAS A BEVEL ANGLE OF 16 DEGREES
style_designatorBEVEL
surface_treatmentANODIZE OVERALL
end_item_identificationCABLE ASSEMBLY
NSN5310-01-628-7608
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G23-3-16 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINOR THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BEVEL
•
OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
HOLE DIAMETER: 0.192 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MINOR THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORBEVEL
OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
SPECIAL FEATURESWASHER HAS A BEVEL ANGLE OF 16 DEGREES
SURFACE TREATMENTANODIZE OVERALL
END ITEM IDENTIFICATIONCABLE ASSEMBLY
MATERIALALUMINUM ALLOY OVERALL
HOLE DIAMETER0.192 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G23-3-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G23-3-16?
G23-3-16 is a WASHER,BEVEL.
What is the NSN for G23-3-16?
G23-3-16 is cataloged in the U.S. Government catalog under NSN 5310-01-628-7608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G23-3-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.