PartsTable
Technical Data Sheet
Download PDF

G228-1-1-4X12 — TURNBUCKLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G228-1-1-4X12: TURNBUCKLE.

The TURNBUCKLE is a the manufacturer industrial component. Key specifications include length: 28.938 INCHES NOMINAL IN, material: STEEL BODY, end_style: CLEVIS AND CLEVIS, body_style: FLAT OPEN BUCKLE, fork_width: 1.750 INCHES NOMINAL IN, body_length: 15.350 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-954-7057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G228-1-1-4X12
NSN: 5340-00-954-7057
FSC: 5340 — Hardware, Commercial
CAGE: 75535 — THE CROSBY GROUP LLC DBA THE CROSBY GROUP (USA)
SPECIFICATIONS
length28.938 INCHES NOMINAL IN
materialSTEEL BODY
end_styleCLEVIS AND CLEVIS
body_styleFLAT OPEN BUCKLE
fork_width1.750 INCHES NOMINAL IN
body_length15.350 INCHES NOMINAL IN
thread_class3A BODY A
take-up_distance12.000 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
nominal_thread_size1.250 INCHES BODY IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) BODY
nondefinitive_spec/std_data1 TYPE AND 1 FORM AND 7 CLASS
NSN5340-00-954-7057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G228-1-1-4X12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TAKE-UP DISTANCE: 12.000 INCHES NOMINAL IN
•
LENGTH: 28.938 INCHES NOMINAL IN
•
BODY STYLE: FLAT OPEN BUCKLE
•
END STYLE: CLEVIS AND CLEVIS
•
NOMINAL THREAD SIZE: 1.250 INCHES BODY IN
•
BODY LENGTH: 15.350 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 FORM AND 7 CLASS
•
FORK WIDTH: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TAKE-UP DISTANCE12.000 INCHES NOMINAL IN
LENGTH28.938 INCHES NOMINAL IN
BODY STYLEFLAT OPEN BUCKLE
END STYLECLEVIS AND CLEVIS
NOMINAL THREAD SIZE1.250 INCHES BODY IN
BODY LENGTH15.350 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 FORM AND 7 CLASS
FORK WIDTH1.750 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
THREAD CLASS3A BODY A
SUBSTITUTES & CROSS-REFERENCES 2
FF-T-791Reference document
Same NSN cross-reference
Reference document — Identification reference
G228-20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy G228-1-1-4X12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G228-1-1-4X12?
G228-1-1-4X12 is a TURNBUCKLE.
What parts can replace G228-1-1-4X12?
There are 2 known substitutes for G228-1-1-4X12: FF-T-791, G228-20. Substitute compatibility should be verified for your specific system.
What is the NSN for G228-1-1-4X12?
G228-1-1-4X12 is cataloged in the U.S. Government catalog under NSN 5340-00-954-7057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G228-1-1-4X12