PartsTable
Technical Data Sheet
Download PDF

G210657-8 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

G210657-8: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: ROUND, nut_diameter: 0.860 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN, nut_thickness: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-027-5931, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G210657-8
NSN: 5310-00-027-5931
FSC: 5310 — Nuts and Washers
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleROUND
nut_diameter0.860 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
nut_thickness0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_seriesUNS
thread_directionRIGHT-HAND
drive_point_depth0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
drive_point_width0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.469 INCHES IN
drive_point_quantity4
thread_pitch_diameters+0.4487 TO 0.4513 INCHES IN
NSN5310-00-027-5931
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G210657-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
THREAD PITCH DIAMETERS: +0.4487 TO 0.4513 INCHES IN
•
DRIVE POINT WIDTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.469 INCHES IN
•
NUT DIAMETER: 0.860 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
THREAD PITCH DIAMETERS+0.4487 TO 0.4513 INCHES IN
DRIVE POINT WIDTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.469 INCHES IN
NUT DIAMETER0.860 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
NUT THICKNESS0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
DRIVE POINT QUANTITY4
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G210657-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G210657-8?
G210657-8 is a NUT,PLAIN,ROUND.
What is the NSN for G210657-8?
G210657-8 is cataloged in the U.S. Government catalog under NSN 5310-00-027-5931. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G210657-8