PartsTable
Technical Data Sheet
Download PDF

G205460053 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

G205460053: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.447 INCHES MINIMUM IN, screw_material: STEEL COMP 1117, fastener_length: 0.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-699-2680, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G205460053
NSN: 5305-00-699-2680
FSC: 5305 — Screws
CAGE: 3B4M0 — LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.447 INCHES MINIMUM IN
screw_materialSTEEL COMP 1117
fastener_length0.562 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentZINC
thread_quantity_per_inch24
NSN5305-00-699-2680
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: G205460053 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: ZINC
•
FASTENER LENGTH: 0.562 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.447 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 1117
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTZINC
FASTENER LENGTH0.562 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.447 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1117
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
G205460-53Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy G205460053?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G205460053?
G205460053 is a SCREW,MACHINE.
What parts can replace G205460053?
There is 1 known substitute for G205460053: G205460-53. Substitute compatibility should be verified for your specific system.
What is the NSN for G205460053?
G205460053 is cataloged in the U.S. Government catalog under NSN 5305-00-699-2680. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G205460053