PartsTable
Technical Data Sheet
Download PDF

G20-31 — TRANSFORMER,AUDIO FREQUENCY

✓ Government record, cited
SportX · BALL BEARING
PRODUCT OVERVIEW

G20-31: TRANSFORMER,AUDIO FREQUENCY.

SportX Junior chlorine glasses, quality two stars. Equipped with an adjustable nose bridge, PVC frame and UV protection. Comes in the colours black and blue on a blister card.

Suitable for children from 8 to 12 years. This part is cataloged in the U.S. Government catalog under NSN 3120-00-661-7520, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G20-31
NSN: 3120-00-661-7520
NIINs: 006617520, 012131715
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 08844 — MARATHONNORCO AEROSPACE, INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM IN
overall_length1.9250 INCHES MINIMUM AND 1.9450 INCHES MAXIMUM IN
pitch_diameter2.3225 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity31
thread_diameter0.250 INCHES NOMINAL IN
NSN3120-00-661-7520
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: G20-31 · SportX ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 0.9688 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 1.5500 INCHES MINIMUM AND 1.5700 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.3230 INCHES MINIMUM AND 0.3330 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BALL TYPE
•
THREAD DIAMETER: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH0.9688 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE1.5500 INCHES MINIMUM AND 1.5700 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.3230 INCHES MINIMUM AND 0.3330 INCHES MAXIMUM IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.250 INCHES NOMINAL IN
OVERALL LENGTH1.9250 INCHES MINIMUM AND 1.9450 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SHANK STYLEEXTERNALLY THREADED
SPECIAL FEATURESMAGNETIC PARTICLE INSPECTED,SHANK STAMPED W/LETTER M
SUBSTITUTES & CROSS-REFERENCES 3
M34-14Reference document
Same NSN cross-reference
Reference document — Secondary reference
11697914Reference document
Same NSN cross-reference
Reference document — Secondary reference
254808Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy G20-31?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G20-31?
G20-31 is a TRANSFORMER,AUDIO FREQUENCY manufactured by SportX.
What parts can replace G20-31?
There are 3 known substitutes for G20-31: M34-14, 11697914, 254808. Substitute compatibility should be verified for your specific system.
What is the NSN for G20-31?
G20-31 is cataloged in the U.S. Government catalog under NSN 3120-00-661-7520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G20-31