PartsTable
Technical Data Sheet
Download PDF

G2-35 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

G2-35: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, end_style: SHORT TWISTED HOOK BOTH ENDS, body_width: 0.260 INCHES NOMINAL IN, body_height: 0.100 INCHES NOMINAL IN, body_length: 0.770 INCHES NOMINAL IN, design_type: CLOSED. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-192-2930, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ G2-35
NSN: 5905-00-192-2930
NIINs: 001922930, 005150640, 010262411, 010538824, 011641878
FSC: 5905 — Resistor
CAGE: 11237 — CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSHORT TWISTED HOOK BOTH ENDS
body_width0.260 INCHES NOMINAL IN
body_height0.100 INCHES NOMINAL IN
body_length0.770 INCHES NOMINAL IN
design_typeCLOSED
hook_radius0.156 INCHES NOMINAL BOTH ENDS IN
load_rating10.00 POUNDS NOMINAL LBS
shaft_styleROUND
switch_typeROTARY
shaft_length0.750 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
NSN5905-00-192-2930
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN G2-35 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
OPERATING POSITION: START OF ROTATION
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 300.000 OHMS 1ST SECTION AND 300.000 OHMS 2ND SECTION
•
SWITCH VOLTAGE RATING IN VOLTS: 10.0
•
SECTION QUANTITY: 2
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
•
NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL IN
•
MOUNTING METHOD: STANDARD BUSHING
TECHNICAL CHARACTERISTICS
OPERATING POSITIONSTART OF ROTATION
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION300.000 OHMS 1ST SECTION AND 300.000 OHMS 2ND SECTION
SWITCH VOLTAGE RATING IN VOLTS10.0
SECTION QUANTITY2
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL IN
MOUNTING METHODSTANDARD BUSHING
FEATURES PROVIDEDSWITCH
SHAFT STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 2
A4123Reference document
Same NSN cross-reference
Reference document — Secondary reference
18A49002Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy G2-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G2-35?
G2-35 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace G2-35?
There are 2 known substitutes for G2-35: A4123, 18A49002. Substitute compatibility should be verified for your specific system.
What is the NSN for G2-35?
G2-35 is cataloged in the U.S. Government catalog under NSN 5905-00-192-2930. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G2-35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.