PartsTable / COMPONENT / G2-11
G2-11
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The TERMINAL,CASUALTY POWER is a the manufacturer industrial component. Key specifications include material: GLASS COVER HOLDER, body_length: 0.530 INCHES MAXIMUM IN, end_cut_angle: 45.0 DEGREES, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.435 INCHES MAXIMUM IN, overall_length: 0.780 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-311-7958, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
G2-11
NSN: 5330-00-311-7958 FSC: 5330 CAGE: 07638 — BLAW KNOX CORP EXECUTIVE OFFICES (USA)
SPECIFICATIONS
material GLASS COVER HOLDER body_length 0.530 INCHES MAXIMUM IN end_cut_angle 45.0 DEGREES hole_diameter 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 0.435 INCHES MAXIMUM IN overall_length 0.780 INCHES MAXIMUM IN first_end_style CHAMFERED terminal_length 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN outside_diameter 5.500 INCHES NOMINAL IN style_designator ROUND BODY, FERRULE TERMINALS aperture_diameter 3.938 INCHES NOMINAL IN circuit_resonance SERIES RESONANCE NSN 5330-00-311-7958
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: G2-11
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• END CUT ANGLE: 45.0 DEGREES
• OUTSIDE DIAMETER: 5.500 INCHES NOMINAL IN
• BOLT CIRCLE DIAMETER: 4.750 INCHES NOMINAL IN
• APERTURE DIAMETER: 3.938 INCHES NOMINAL IN
• HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• MATERIAL: CELLULOSE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
END CUT ANGLE 45.0 DEGREES OUTSIDE DIAMETER 5.500 INCHES NOMINAL IN BOLT CIRCLE DIAMETER 4.750 INCHES NOMINAL IN APERTURE DIAMETER 3.938 INCHES NOMINAL IN HOLE DIAMETER 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN MATERIAL CELLULOSE OVERALL CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
411628-9 Interchangeable interchangeable cross-reference
interchangeable
A1-13 Interchangeable interchangeable cross-reference
interchangeable
13033991 Interchangeable interchangeable cross-reference
interchangeable
CR133/U100M1000 Interchangeable interchangeable cross-reference
interchangeable
8537694-1 Interchangeable interchangeable cross-reference
interchangeable
G21-1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy G2-11?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G2-11?
G2-11 is a TERMINAL,CASUALTY POWER.
What parts can replace G2-11?
There are 10 known substitutes for G2-11: 411628-9, A1-13, 13033991 and 7 more. Substitute compatibility should be verified for your specific system.
Is G2-11 still available?
G2-11 is currently cancelled.