PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G1535
G1535 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.8480 INCHES NOMINAL IN, bore_diameter: 0.7500 INCHES NOMINAL IN, special_features: 0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN, style_designator: NORMAL ANGLE, circuit_resonance: SERIES RESONANCE.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G1535
NSN: 3110-00-100-3705
FSC: 3110
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.8480 INCHES NOMINAL IN
bore_diameter0.7500 INCHES NOMINAL IN
special_features0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN
style_designatorNORMAL ANGLE
circuit_resonanceSERIES RESONANCE
cone_corner_radius0.8480 INCHES NOMINAL IN
mode_of_oscillationFUNDAMENTAL
specified_frequency8.000 MEGAHERTZ
operating_temp_range-55.0 TO 90.0 CELSIUS DEGC
standard_tolerance_designationAFBMA CLASS 2
equivalent_resistance_value_in_ohms30.0 NOMINAL
NSN3110-00-100-3705
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: G1535 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.8480 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.8480 INCHES NOMINAL IN
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN
CONE CORNER RADIUS0.8480 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.8480 INCHES NOMINAL IN
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
4141-3Interchangeable
interchangeable cross-reference
interchangeable
240-2710-110Interchangeable
interchangeable cross-reference
interchangeable
19370-11Interchangeable
interchangeable cross-reference
interchangeable
9211Interchangeable
interchangeable cross-reference
interchangeable
2439686-1Interchangeable
interchangeable cross-reference
interchangeable
2042-6405-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy G1535?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G1535?
G1535 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace G1535?
There are 30 known substitutes for G1535: 4141-3, 240-2710-110, 19370-11 and 27 more. Substitute compatibility should be verified for your specific system.
Is G1535 still available?
G1535 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G1535

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026