PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G15114PC42
G15114PC42 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 2.5313 INCHES NOMINAL IN, nut_thickness: 0.5625 INCHES NOMINAL IN, thread_series: UNS, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6527, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G15114PC42
NSN: 5310-00-185-6527
FSC: 5310
CAGE: 16712 — SIEMENS ENERGY, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter2.5313 INCHES NOMINAL IN
nut_thickness0.5625 INCHES NOMINAL IN
thread_seriesUNS
thread_directionRIGHT-HAND
drive_point_depth0.0937 INCHES NOMINAL IN
drive_point_width0.250 INCHES NOMINAL IN
nominal_thread_size1.767 INCHES IN
drive_point_quantity4
thread_pitch_diameters+1.7309 TO 1.7354 INCHES IN
thread_quantity_per_inch18
NSN5310-00-185-6527
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G15114PC42 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT THICKNESS: 0.5625 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
NOMINAL THREAD SIZE: 1.767 INCHES IN
•
THREAD QUANTITY PER INCH: 18
•
MATERIAL: STEEL OVERALL
•
THREAD PITCH DIAMETERS: +1.7309 TO 1.7354 INCHES IN
•
NUT DIAMETER: 2.5313 INCHES NOMINAL IN
•
DRIVE POINT QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
NUT THICKNESS0.5625 INCHES NOMINAL IN
THREAD SERIESUNS
NOMINAL THREAD SIZE1.767 INCHES IN
THREAD QUANTITY PER INCH18
MATERIALSTEEL OVERALL
THREAD PITCH DIAMETERS+1.7309 TO 1.7354 INCHES IN
NUT DIAMETER2.5313 INCHES NOMINAL IN
DRIVE POINT QUANTITY4
THREAD DIRECTIONRIGHT-HAND
DRIVE POINT WIDTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
300-080Interchangeable
interchangeable cross-reference
interchangeable
42D7019Interchangeable
interchangeable cross-reference
interchangeable
389-1Interchangeable
interchangeable cross-reference
interchangeable
E2644-32Interchangeable
Same NIIN cross-reference
interchangeable
N109Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G15114PC42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G15114PC42?
G15114PC42 is a NUT,PLAIN,ROUND.
What parts can replace G15114PC42?
There are 5 known substitutes for G15114PC42: 300-080, 42D7019, 389-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G15114PC42?
G15114PC42 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6527. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G15114PC42

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026