PartsTable
Technical Data Sheet
Download PDF

G1393 — GROMMET,NONMETALLIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G1393: GROMMET,NONMETALLIC.

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, grommet_style: ROUND, hole_diameter: 1.75 INCHES NOMINAL IN, overall_width: 49.750 INCHES MINIMUM AND 50.250 INCHES MAXIMUM IN, overall_height: 0.530 INCHES NOMINAL IN, overall_length: 49.750 INCHES MINIMUM AND 50.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-027-2882, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G1393
NSN: 5330-01-027-2882
NIINs: 010272882, 013865379, 016807595
FSC: 5330 — Packing and Gasket Materials
CAGE: 31923 — TODD COMBUSTION INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
grommet_styleROUND
hole_diameter1.75 INCHES NOMINAL IN
overall_width49.750 INCHES MINIMUM AND 50.250 INCHES MAXIMUM IN
overall_height0.530 INCHES NOMINAL IN
overall_length49.750 INCHES MINIMUM AND 50.250 INCHES MAXIMUM IN
special_featuresOPERATING TEMP: -40 DEF F TO 221 DEG F DEGF
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
end_item_identification2330-01-653-9745
cross-sectional_thickness0.125 INCHES NOMINAL IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
large_flange_outside_diameter2.50 INCHES NOMINAL IN
NSN5330-01-027-2882
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G1393 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUBSTITUTES & CROSS-REFERENCES 3
N47500GPC25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
970-301060-3X16Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D-42060PC25Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy G1393?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G1393?
G1393 is a GROMMET,NONMETALLIC.
What parts can replace G1393?
There are 3 known substitutes for G1393: N47500GPC25, 970-301060-3X16, D-42060PC25. Substitute compatibility should be verified for your specific system.
What is the NSN for G1393?
G1393 is cataloged in the U.S. Government catalog under NSN 5330-01-027-2882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G1393