PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G13822
G13822 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: RECESSED, seal_width: 0.486 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, housing_bore_diameter: 4.334 INCHES MINIMUM AND 4.338 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-220-1793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G13822
NSN: 5330-00-220-1793
FSC: 5330
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleRECESSED
seal_width0.486 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
housing_bore_diameter4.334 INCHES MINIMUM AND 4.338 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
NSN5330-00-220-1793
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G13822 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 4.334 INCHES MINIMUM AND 4.338 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.486 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER4.334 INCHES MINIMUM AND 4.338 INCHES MAXIMUM IN
SEAL WIDTH0.486 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
CASE STYLERECESSED
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
30060Interchangeable
interchangeable cross-reference
interchangeable
11263809Interchangeable
interchangeable cross-reference
interchangeable
H-95Interchangeable
interchangeable cross-reference
interchangeable
BG26280Interchangeable
interchangeable cross-reference
interchangeable
624VLK0012DInterchangeable
interchangeable cross-reference
interchangeable
TH3859Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G13822?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G13822?
G13822 is a SEAL,PLAIN ENCASED.
What parts can replace G13822?
There are 12 known substitutes for G13822: 30060, 11263809, H-95 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G13822?
G13822 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-220-1793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G13822

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026