PartsTable
Technical Data Sheet
Download PDF

G133161-1 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G133161-1: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, temp_rating: -65.0 FAHRENHEIT AND 140.0 FAHRENHEIT DEGF, hardness_rating: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL, cross-sectional_height: 0.407 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-230-5221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G133161-1
NSN: 5330-00-230-5221
FSC: 5330 — Packing and Gasket Materials
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
temp_rating-65.0 FAHRENHEIT AND 140.0 FAHRENHEIT DEGF
hardness_rating35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
cross-sectional_height0.407 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-00-230-5221
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G133161-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 140.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.407 INCHES NOMINAL IN
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 140.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.407 INCHES NOMINAL IN
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLEU
MATERIALRUBBER SILICONE CLASS Q OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
B19670Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
19670Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G133161-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G133161-1?
G133161-1 is a PACKING,PREFORMED.
What parts can replace G133161-1?
There are 2 known substitutes for G133161-1: B19670, 19670. Substitute compatibility should be verified for your specific system.
What is the NSN for G133161-1?
G133161-1 is cataloged in the U.S. Government catalog under NSN 5330-00-230-5221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G133161-1