PartsTable
Technical Data Sheet
Download PDF

G12-32 — GEAR,SPUR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

G12-32: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, groove_width: 0.062 INCHES NOMINAL IN, grommet_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-248-7098, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G12-32
NSN: 5325-00-248-7098
NIINs: 002487098, 005374024
FSC: 5325 — Fastening Devices
CAGE: 79497 — WESTERN RUBBER CO (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
groove_width0.062 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.328 INCHES NOMINAL IN
overall_height0.312 INCHES NOMINAL IN
pitch_diameter0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
pressure_angle20.0000 DEGREES
teeth_quantity32
flange_thickness0.125 INCHES NOMINAL IN
NSN5325-00-248-7098
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: G12-32 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET STYLE: ROUND
•
FLANGE THICKNESS: 0.125 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 0.719 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.531 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SOLID
•
MATERIAL: RUBBER SYNTHETIC WASHER
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.312 INCHES NOMINAL IN
GROMMET STYLEROUND
FLANGE THICKNESS0.125 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER0.719 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.531 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESOLID
MATERIALRUBBER SYNTHETIC WASHER
GROOVE WIDTH0.062 INCHES NOMINAL IN
HOLE DIAMETER0.328 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
K57421-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy G12-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G12-32?
G12-32 is a GEAR,SPUR.
What parts can replace G12-32?
There is 1 known substitute for G12-32: K57421-3. Substitute compatibility should be verified for your specific system.
What is the NSN for G12-32?
G12-32 is cataloged in the U.S. Government catalog under NSN 5325-00-248-7098. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G12-32