PartsTable
Technical Data Sheet
Download PDF

G103463 — PARTS KIT,LINEAR ACTUATING CYLIN

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

G103463: PARTS KIT,LINEAR ACTUATING CYLIN.

PARTS KIT,LINEAR ACTUATING CYLIN. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE INSIDE LEFT CORNER, flange_width: 0.0930 INCHES NOMINAL IN, overall_length: 0.6500 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES INTERMEDIATE LAYER, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-555-7043, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G103463
NSN: 3120-00-555-7043
NIINs: 005557043, 011011578
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: C0417 — AIRBUS HELICOPTERS DEUTSCHLAND GMBH (DEU)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE INSIDE LEFT CORNER
flange_width0.0930 INCHES NOMINAL IN
overall_length0.6500 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES INTERMEDIATE LAYER
style_designatorSOLID, EXTERNAL FLANGE ONE END
surface_treatmentCADMIUM OVERALL
body_inside_diameter0.8860 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM IN
body_outside_diameter1.1263 INCHES MINIMUM AND 1.1269 INCHES MAXIMUM IN
flange_outside_diameter1.3020 INCHES MINIMUM AND 1.3220 INCHES MAXIMUM IN
NSN3120-00-555-7043
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: G103463 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES INTERMEDIATE LAYER
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
FLANGE OUTSIDE DIAMETER: 1.3020 INCHES MINIMUM AND 1.3220 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES INTERMEDIATE LAYER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER1.3020 INCHES MINIMUM AND 1.3220 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER1.1263 INCHES MINIMUM AND 1.1269 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SUBSTITUTES & CROSS-REFERENCES 1
343AS188Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G103463?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G103463?
G103463 is a PARTS KIT,LINEAR ACTUATING CYLIN.
What parts can replace G103463?
There is 1 known substitute for G103463: 343AS188. Substitute compatibility should be verified for your specific system.
What is the NSN for G103463?
G103463 is cataloged in the U.S. Government catalog under NSN 3120-00-555-7043. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G103463

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.