PartsTable
Technical Data Sheet
Download PDF

G103-461 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G103-461: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 1.250 INCHES NOMINAL IN, material: STEEL COMP 301 OVERALL, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM OVERALL, loop_opening_width: 0.719 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-064-7344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G103-461
NSN: 5340-01-064-7344
NIINs: 010647344, 012111517
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length1.250 INCHES NOMINAL IN
materialSTEEL COMP 301 OVERALL
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM OVERALL
loop_opening_width0.719 INCHES NOMINAL IN
material_thickness0.025 INCHES NOMINAL IN
loop/holding_dimension0.188 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059,1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-064-7344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G103-461 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.250 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.188 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.719 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH1.250 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.188 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
LOOP OPENING WIDTH0.719 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G103-461?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G103-461?
G103-461 is a CLIP,SPRING TENSION.
What is the NSN for G103-461?
G103-461 is cataloged in the U.S. Government catalog under NSN 5340-01-064-7344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G103-461

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.