PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G10228PC69
G10228PC69 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN, pin_overall_diameter: 0.1842 INCHES MINIMUM AND 0.1847 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.016 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G10228PC69
NSN: 5315-00-014-1151
FSC: 5315
CAGE: 16712 — SIEMENS ENERGY, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
pin_overall_diameter0.1842 INCHES MINIMUM AND 0.1847 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
material_document_and_classificationCOMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-014-1151
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G10228PC69 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL DIAMETER: 0.1842 INCHES MINIMUM AND 0.1847 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: COMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
PIN OVERALL DIAMETER0.1842 INCHES MINIMUM AND 0.1847 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONCOMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
M1784Interchangeable
interchangeable cross-reference
interchangeable
1784Interchangeable
interchangeable cross-reference
interchangeable
T32AInterchangeable
interchangeable cross-reference
interchangeable
850Interchangeable
interchangeable cross-reference
interchangeable
53FInterchangeable
interchangeable cross-reference
interchangeable
LD494625Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G10228PC69?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G10228PC69?
G10228PC69 is a PIN,STRAIGHT,HEADLESS.
What parts can replace G10228PC69?
There are 18 known substitutes for G10228PC69: M1784, 1784, T32A and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G10228PC69?
G10228PC69 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1151. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G10228PC69

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026