G102-214 — CYLINDER ASSEMBLY,ACTUATING,LINE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

G102-214: CYLINDER ASSEMBLY,ACTUATING,LINE.

CYLINDER ASSEMBLY,ACTUATING,LINE. Key specifications include material: STEEL OVERALL, end_style: MACHINED HALF LOOP BOTH ENDS, design_type: CLOSED, hook_radius: 0.156 INCHES NOMINAL BOTH ENDS IN, load_rating: 8.460 POUNDS MINIMUM AND 10.340 POUNDS MAXIMUM LBS, coil_quantity: 13-1/2. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-792-2703, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

G102-214

NSN: 5360-00-792-2703
NIINs: 007922703, 012183631
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

material	STEEL OVERALL
end_style	MACHINED HALF LOOP BOTH ENDS
design_type	CLOSED
hook_radius	0.156 INCHES NOMINAL BOTH ENDS IN
load_rating	8.460 POUNDS MINIMUM AND 10.340 POUNDS MAXIMUM LBS
coil_quantity	13-1/2
opening_width	0.040 INCHES MINIMUM AND 0.042 INCHES MAXIMUM BOTH ENDS IN
inside_diameter	0.212 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
surface_treatment	CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
spring_free_length	1.111 INCHES MINIMUM AND 1.177 INCHES MAXIMUM IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
NSN	5360-00-792-2703

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC ALL TREATMENT RESPONSES OVERALL

•

LOAD RATING: 8.460 POUNDS MINIMUM AND 10.340 POUNDS MAXIMUM LBS

•

END STYLE: MACHINED HALF LOOP BOTH ENDS

•

DESIGN TYPE: CLOSED

•

STYLE DESIGNATOR: CYLINDRICAL

•

OPENING WIDTH: 0.040 INCHES MINIMUM AND 0.042 INCHES MAXIMUM BOTH ENDS IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-6101 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC ALL TREATMENT RESPONSES OVERALL
LOAD RATING	8.460 POUNDS MINIMUM AND 10.340 POUNDS MAXIMUM LBS
END STYLE	MACHINED HALF LOOP BOTH ENDS
DESIGN TYPE	CLOSED
STYLE DESIGNATOR	CYLINDRICAL
OPENING WIDTH	0.040 INCHES MINIMUM AND 0.042 INCHES MAXIMUM BOTH ENDS IN
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-W-6101 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	1.111 INCHES MINIMUM AND 1.177 INCHES MAXIMUM IN
SPRING DEFLECTION RATE	15.000 POUNDS PER INCH NOMINAL LBS

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy G102-214?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is G102-214?

G102-214 is a CYLINDER ASSEMBLY,ACTUATING,LINE.

What is the NSN for G102-214?

G102-214 is cataloged in the U.S. Government catalog under NSN 5360-00-792-2703. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

G102-214 — CYLINDER ASSEMBLY,ACTUATING,LINE

Request a Quote — G102-214