PartsTable
Technical Data Sheet
Download PDF

G102 — SLEEVE,ASPIRATOR,DENTAL

✓ Government record, cited
Zyxel · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

G102: SLEEVE,ASPIRATOR,DENTAL.

- Data rate up to 54Mbps, 5x faster than 802.11b networks. - Backward compatible with 802.11b standard. - Seamless roaming between different access points.

- Enhanced wireless security (WPA and WPA2) support. - 64/128/152-bit Wired Equivalent Privacy (WEP) support. - WiFi and WPA2 certified.

- Supports Microsoft Vista operating system. This part is cataloged in the U.S. Government catalog under NSN 6115-00-248-0398, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ G102
NSN: 6115-00-248-0398
NIINs: 002480398, 004365243, 008142583, 012724548, 017256984
FSC: 6115 — Generators and Generator Sets, Electrical
CAGE: 72483 — FRACTIONAL MOTORS CO (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OVERALL
thickness0.050 INCHES NOMINAL IN
duty_cycleCONTINUOUS
temp_rating40.0 AMBIENT CELSIUS
unit_designDESK TOP
excitor_typeSELF-EXCITED
winding_typeCOMPOUND WOUND
hole_diameter1.156 INCHES NOMINAL IN
lens_quantity1
overall_width5.063 INCHES IN
interface_typeUSB
overall_height6.031 INCHES IN
NSN6115-00-248-0398
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K G102 Zyxel NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN G102 MFR Zyxel
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 4 UNTHREADED HOLE(S)
•
DUTY CYCLE: CONTINUOUS
•
SHAFT DIAMETER: 0.500 INCHES NOMINAL SINGLE END IN
•
SHAFT CENTER TO MOUNTING SURFACE DISTANCE: 3.500 INCHES SINGLE END IN
•
WINDING TYPE: COMPOUND WOUND
•
MOUNTING METHOD: FIXED BASE
•
SHAFT ROTATION DIRECTION: CLOCKWISE SINGLE END
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE(S)
DUTY CYCLECONTINUOUS
SHAFT DIAMETER0.500 INCHES NOMINAL SINGLE END IN
SHAFT CENTER TO MOUNTING SURFACE DISTANCE3.500 INCHES SINGLE END IN
OVERALL LENGTH10.438 INCHES IN
WINDING TYPECOMPOUND WOUND
MOUNTING METHODFIXED BASE
SHAFT ROTATION DIRECTIONCLOCKWISE SINGLE END
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS240.0 LINE TO NEUTRAL SINGLE OUTPUT
OVERALL WIDTH5.063 INCHES IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy G102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G102?
G102 is a SLEEVE,ASPIRATOR,DENTAL manufactured by Zyxel. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What is the NSN for G102?
G102 is cataloged in the U.S. Government catalog under NSN 6115-00-248-0398. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G102