PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G1-30-9006-001
G1-30-9006-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 0.7900 INCHES NOMINAL IN, leaf_width: 0.3800 INCHES NOMINAL IN, knuckle_type: FRICTION, overall_length: 1.0000 INCHES NOMINAL IN, performance_type: NOT RATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-450-2508, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G1-30-9006-001
NSN: 5340-01-450-2508
FSC: 5340
CAGE: 55827 — ASTRONICS DME LLC DBA ASTRONICS DME (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width0.7900 INCHES NOMINAL IN
leaf_width0.3800 INCHES NOMINAL IN
knuckle_typeFRICTION
overall_length1.0000 INCHES NOMINAL IN
performance_typeNOT RATED
mounting_hole_diameter0.2000 INCHES NOMINAL IN
NSN5340-01-450-2508
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G1-30-9006-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE TYPE: FRICTION
•
LEAF WIDTH: 0.3800 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
MOUNTING HOLE DIAMETER: 0.2000 INCHES NOMINAL IN
•
BODY WIDTH: 0.7900 INCHES NOMINAL IN
•
PERFORMANCE TYPE: NOT RATED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.0000 INCHES NOMINAL IN
KNUCKLE TYPEFRICTION
LEAF WIDTH0.3800 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
MOUNTING HOLE DIAMETER0.2000 INCHES NOMINAL IN
BODY WIDTH0.7900 INCHES NOMINAL IN
PERFORMANCE TYPENOT RATED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
96-111Interchangeable
interchangeable cross-reference
interchangeable
537135Interchangeable
interchangeable cross-reference
interchangeable
885C883P3Interchangeable
interchangeable cross-reference
interchangeable
885C883P0003Interchangeable
interchangeable cross-reference
interchangeable
50A2900Interchangeable
interchangeable cross-reference
interchangeable
WC9611-1WInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G1-30-9006-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G1-30-9006-001?
G1-30-9006-001 is a HINGE,BUTT.
What parts can replace G1-30-9006-001?
There are 9 known substitutes for G1-30-9006-001: 96-111, 537135, 885C883P3 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G1-30-9006-001?
G1-30-9006-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-450-2508. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G1-30-9006-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026