PartsTable
Technical Data Sheet
Download PDF

G1-22-9080 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G1-22-9080: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.188 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, style_designator: PAN TOP COUNTERBORED, first_counterbore_depth: 0.500 INCHES NOMINAL IN, first_counterbore_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-432-1195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G1-22-9080
NSN: 5340-01-432-1195
FSC: 5340 — Hardware, Commercial
CAGE: 55827 — ASTRONICS DME LLC DBA ASTRONICS DME (USA)
SPECIFICATIONS
materialRUBBER
hole_diameter0.188 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
style_designatorPAN TOP COUNTERBORED
first_counterbore_depth0.500 INCHES NOMINAL IN
first_counterbore_diameter0.375 INCHES NOMINAL IN
outside/top_flange_diameter1.125 INCHES NOMINAL IN
NSN5340-01-432-1195
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G1-22-9080 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 1.125 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PAN TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER1.125 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.375 INCHES NOMINAL IN
STYLE DESIGNATORPAN TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.500 INCHES NOMINAL IN
MATERIALRUBBER
HOLE DIAMETER0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy G1-22-9080?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G1-22-9080?
G1-22-9080 is a BUMPER.
What is the NSN for G1-22-9080?
G1-22-9080 is cataloged in the U.S. Government catalog under NSN 5340-01-432-1195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G1-22-9080