PartsTable
Technical Data Sheet
Download PDF

G08DU — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

G08DU: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 0.6250 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM IN, material: STEEL COMP 1008 OUTER LAYER, corner_shape: SQUARE ALL CORNERS, outside_diameter: 1.1150 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN, special_features: DOWEL HOLE ON P.C. DIAMETER, style_designator: ROUND.

This part is cataloged in the U.S. Government catalog under NSN 3120-00-753-4397, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G08DU
NSN: 3120-00-753-4397
NIINs: 007534397, 011855281, 013512624
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 26124 — GGB LLC (USA)
SPECIFICATIONS
diameter0.6250 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OUTER LAYER
corner_shapeSQUARE ALL CORNERS
outside_diameter1.1150 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
special_featuresDOWEL HOLE ON P.C. DIAMETER
style_designatorROUND
overall_thickness0.0585 INCHES MINIMUM AND 0.0605 INCHES MAXIMUM IN
surface_treatmentTIN OUTER LAYER
lubrication_featurePERFORATION FLAT BEARING SURFACE
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
specification/standard_data87557-1377832 MANUFACTURERS SOURCE CONTROL
NSN3120-00-753-4397
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: G08DU · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BEARING SURFACE HOLE DIAMETER: 0.1040 INCHES NOMINAL FIRST IN
•
OVERALL THICKNESS: 0.0620 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND
•
DIAMETER: 0.6300 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 1.1200 INCHES NOMINAL IN
•
LUBRICATION FEATURE: PERFORATION FLAT BEARING SURFACE
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BEARING SURFACE HOLE DIAMETER0.1040 INCHES NOMINAL FIRST IN
OVERALL THICKNESS0.0620 INCHES NOMINAL IN
STYLE DESIGNATORROUND
DIAMETER0.6300 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER1.1200 INCHES NOMINAL IN
LUBRICATION FEATUREPERFORATION FLAT BEARING SURFACE
BEARING SURFACE HOLE QUANTITY1 FIRST
MATERIALLUBRICANT LUBRICATION
SUBSTITUTES & CROSS-REFERENCES 1
DU08Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy G08DU?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G08DU?
G08DU is a BEARING,WASHER,THRUST.
What parts can replace G08DU?
There is 1 known substitute for G08DU: DU08. Substitute compatibility should be verified for your specific system.
What is the NSN for G08DU?
G08DU is cataloged in the U.S. Government catalog under NSN 3120-00-753-4397. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G08DU