PartsTable
Technical Data Sheet
Download PDF

G0013648 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

G0013648: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYOLEFIN BODY, overall_height: 2.830 INCHES NOMINAL IN, sealing_method: COMPRESSION, mounting_method: NUT(S), special_features: INNER ADHESIVE COATING, base_thread_location: EXTERNAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-206-4790, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G0013648
NSN: 5340-01-206-4790
FSC: 5340 — Hardware, Commercial
CAGE: U4535 — BAE SYSTEMS ELECTRONICS LIMITED DIV UNDERWATER SYSTEMS DIVISION (GBR)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN BODY
overall_height2.830 INCHES NOMINAL IN
sealing_methodCOMPRESSION
mounting_methodNUT(S)
special_featuresINNER ADHESIVE COATING
base_thread_locationEXTERNAL
opening_inside_diameter0.710 INCHES MINIMUM IN
NSN5340-01-206-4790
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G0013648 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING METHOD: COMPRESSION
•
OPENING INSIDE DIAMETER: 0.710 INCHES MINIMUM IN
•
MOUNTING METHOD: NUT(S)
•
BASE THREAD LOCATION: EXTERNAL
•
MATERIAL: PLASTIC POLYOLEFIN BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.830 INCHES NOMINAL IN
SEALING METHODCOMPRESSION
OPENING INSIDE DIAMETER0.710 INCHES MINIMUM IN
MOUNTING METHODNUT(S)
BASE THREAD LOCATIONEXTERNAL
SPECIAL FEATURESINNER ADHESIVE COATING
MATERIALPLASTIC POLYOLEFIN BODY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12619191-2Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
HAZMAT per U.S. Government catalogAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy G0013648?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G0013648?
G0013648 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace G0013648?
There is 1 known substitute for G0013648: 12619191-2. Substitute compatibility should be verified for your specific system.
What is the NSN for G0013648?
G0013648 is cataloged in the U.S. Government catalog under NSN 5340-01-206-4790. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G0013648