The COMB,DOG is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: COMB, SHEDDING, MILITARY WORKING DOG. This part is cataloged in the U.S.
Government catalog under NSN 3770-01-616-3506, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
G0001177
NSN:3770-01-616-3506 FSC:3770 — Saddlery, Harness, Whips, and Related Animal Furnishings CAGE:0SWN5 — GARRETT CONTAINER SYSTEMS, INC. (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agency
COMB, SHEDDING, MILITARY WORKING DOG
NSN
3770-01-616-3506
COMPONENT DIAGRAM
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: THE COMB SHALL BE DESIGNED AND FABRICATED FOR THOROUGH REMOVAL OF DEAD HEAR FROM A DOG'S COAT. THE COMB SHALL HAVE A HANDLE EXTENDING FROM, AND PERPENDICULAR TO, THE BACK OF THE COMB. THE TEETH OF THE COMB SHALL HAVE THE FORM OF NARROW TRIANGLES JOINED AT THEIR BASIS, SO THAT HAIRS ARE WEDGED TOGETHER AS THE COMB PASSES THROUGH THEM. THE TIPS OF THE TEETH SHALL BE ROUNDED IN THE COMBING DIRECTION TO MINIMIZE IRRITATION OF THE DOG'S SKIN. THE TEETH SHALLEXTEND STRAIGHT OUT FROM THE BACK OF THE COMB, PERPENDICULAR TO THE LENGTH OF HANDLE, AND SHALL BE EVENLY SPACED. THE COMB SHALL HAVE 50 TO 75 TEETH PER INCH. THE TOOTHED SECTION OF THE COMB SHALL BE AT LEAST 2 INCHES IN LENGTH, AND THE HANDLE SHALL BE AT LEAST 4 INCHES LONG. THE TEETH SHALL BE OF EQUAL LENGTH AND SHALL BE 0.125 TO 0.375 INCH FROM TIP TO BASE. IN
TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS ITEM DESCRIPTION
THE COMB SHALL BE DESIGNED AND FABRICATED FOR THOROUGH REMOVAL OF DEAD HEAR FROM A DOG'S COAT. THE COMB SHALL HAVE A HANDLE EXTENDING FROM, AND PERPENDICULAR TO, THE BACK OF THE COMB. THE TEETH OF THE COMB SHALL HAVE THE FORM OF NARROW TRIANGLES JOINED AT THEIR BASIS, SO THAT HAIRS ARE WEDGED TOGETHER AS THE COMB PASSES THROUGH THEM. THE TIPS OF THE TEETH SHALL BE ROUNDED IN THE COMBING DIRECTION TO MINIMIZE IRRITATION OF THE DOG'S SKIN. THE TEETH SHALLEXTEND STRAIGHT OUT FROM THE BACK OF THE COMB, PERPENDICULAR TO THE LENGTH OF HANDLE, AND SHALL BE EVENLY SPACED. THE COMB SHALL HAVE 50 TO 75 TEETH PER INCH. THE TOOTHED SECTION OF THE COMB SHALL BE AT LEAST 2 INCHES IN LENGTH, AND THE HANDLE SHALL BE AT LEAST 4 INCHES LONG. THE TEETH SHALL BE OF EQUAL LENGTH AND SHALL BE 0.125 TO 0.375 INCH FROM TIP TO BASE. IN
SPECIAL FEATURES
THE TEETH SHALL BE FABRICATED OF STAINLESS STEEL. THE BACK AND HANDLE OF THE COMB MAY BE FABRICATED OF METAL OR ORGANIC MATERIAL.ANY METAL USED SHALL BE TREATED TO RESIST CORROSION. ANY ORGANIC MATERIAL USED SHALL BE NON-ABSORBENT AND WASHABLE IN HOT, SOAPY WATER. THE MATERIALS SHALL NOT BE BIODEGRADABLE AND SHALL NOT BE DAMAGED BY STORAGE AT HIGH AND LOW TEMPERATURES. THE COLOR IS OPTIONAL.
PART NAME ASSIGNED BY CONTROLLING AGENCY
COMB, SHEDDING, MILITARY WORKING DOG
OTHER ITEMS IN FSC 3770 — Saddlery, Harness, Whips, and Related Animal Furnishings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G0001177?
G0001177 is a COMB,DOG.
What parts can replace G0001177?
There is 1 known substitute for G0001177: DFP-628/20. Substitute compatibility should be verified for your specific system.
What is the NSN for G0001177?
G0001177 is cataloged in the U.S. Government catalog under NSN 3770-01-616-3506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.