PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G-675 ITEM 3
G-675 ITEM 3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ASBESTOS SHEET,COMPRESSED is a the manufacturer industrial component. Key specifications include width: 36.000 INCHES NOMINAL IN, length: 150.000 INCHES NOMINAL IN, material: ASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.125 INCHES NOMINAL IN, minimum_tensile_strength: ERR-060, nondefinitive_spec/std_data: 1 CLASS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-222-2564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G-675 ITEM 3
NSN: 5330-00-222-2564
FSC: 5330
CAGE: 82666 — STOCKHAM VALVES AND FITTINGS INC (USA)
SPECIFICATIONS
width36.000 INCHES NOMINAL IN
length150.000 INCHES NOMINAL IN
materialASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC LOCATION NOT OTHERWISE SPECIFIED
thickness0.125 INCHES NOMINAL IN
minimum_tensile_strengthERR-060
nondefinitive_spec/std_data1 CLASS
material_document_and_classificationMIL-A-7021, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5330-00-222-2564
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G-675 ITEM 3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 36.000 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-A-7021, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
NONDEFINITIVE SPEC/STD DATA: 1 CLASS
•
MINIMUM TENSILE STRENGTH: ERR-060
•
LENGTH: 150.000 INCHES NOMINAL IN
•
THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH36.000 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC LOCATION NOT OTHERWISE SPECIFIED
MATERIALRUBBER SYNTHETIC BINDER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-7021, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NONDEFINITIVE SPEC/STD DATA1 CLASS
MINIMUM TENSILE STRENGTHERR-060
LENGTH150.000 INCHES NOMINAL IN
THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
53S586MInterchangeable
interchangeable cross-reference
interchangeable
SSBN608-203-200 8033-8Interchangeable
interchangeable cross-reference
interchangeable
9102-13Interchangeable
interchangeable cross-reference
interchangeable
F-20S-1JInterchangeable
interchangeable cross-reference
interchangeable
F-205-1JInterchangeable
interchangeable cross-reference
interchangeable
F579 PC1BInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G-675 ITEM 3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G-675 ITEM 3?
G-675 ITEM 3 is a ASBESTOS SHEET,COMPRESSED.
What parts can replace G-675 ITEM 3?
There are 8 known substitutes for G-675 ITEM 3: 53S586M, SSBN608-203-200 8033-8, 9102-13 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G-675 ITEM 3?
G-675 ITEM 3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-222-2564. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G-675 ITEM 3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026